SW12 In-Wall Shutter Switch - X10 - Marmitek

Product no.: SW12

Shipping time: 1-4 working days

Please click to zoom and for more pictures.

EUR 51.00

incl. 19% VAT, excl. shipping costs

You would like to keep your existing wall switch design but not do without the comfort of the home automation? This in-wall shutter switch is then the right thing for you!

X10 commands: On, Off, Dim, Bright, Extended code

The SW12 is a very little X10 receiver for the installation behind (existing) momentary switches. Besides the control by a controller like the ActiveHomePro Interface CM15Pro or a remote control it can be connected to 2 momentary switches (1 x for up/open, 1 for down/close). The SW12 is designed to fit in the rear of European junction boxes, behind any installed momentary switch, presupposed a rest mounting depth of approx. 20mm.

Features SW12 In-Wall Shutter Switch:

Very small - 46 x 46mm and only 17mm height.
Up to 700W load for motors.
Quiet relays.
House code, unit code and adjustments are very simply to programme with any compatible X10 controller (e. g. EasyControl 8 in connection with the TM13 transceiver).

This product is also available as special offer.

Applications

Up/down or open/close remote control for electrical blinds, curtains, sunscreens etc.
X10 control for already existing motors.
Free choice (brand, design, colour etc.) for switches and electrical outlets.
Invisible installation of X10 modules.
Ideal also for the installation into ceiling outlets, shutter boxes and everywhere else where space is limited.

Technical data

Power supply: 230VAC/50Hz
Energy consumption: < 1W
Capacity: 700W/230VAC for motors
Signal sensitivity: 50mVpp max. at 120kHz
External control: momentary switches with 2 normally open contacts
Conductor size: up to 2.5mm²
3 phase operation: with 3 x FD10 Filter / Coupler for rail mount or 1 x CAT4000 Phase Coupler Repeater
Ambient temperature: 0°C to 40°C (operation)
Dimensions: 46 x 46 x 17mm
Mounting dimensions: 50 x 50 x 20mm
Certificates: CE
Note: For professional installation, please consult your electrician.