TMD4 MicroModule - X10 - Marmitek

You would like to keep your existing wall switch design but not do without the comfort of the home automation? The MicroModules are then the right thing for you!

X10 commands: On, Off, Dim, Bright

The TMD4 MicroModule is a very small X10 transmitter for four X10 addresses and the X10 commands On/Off and Dim/Bright. The TMD4 can be connected to up to four momentary switches and sends the X10 On/Off and Dim/Bright commands to up to four successive X10 addresses. MicroModules are designed to fit in the rear of European junction boxes, behind any installed switch or outlet, presupposed a rest mounting depth of approx. 20mm.

Features:

• Very small - 46 x 46mm and only 16mm height.
• Two way X10 communication without additional wiring between the modules - MicroModules send their status each other by power line.
• Possibility to synchronize its On and Off status by the X10 commands "All Lights On" and "All Units Off".
• House code, unit code and adjustments are very simply to programme with any compatible X10 controller (e. g. EasyControl 8 in connection with the TM13 transceiver).
• Improved signal quality for a reliable X10 communication.
• Power/status/configuration LED

Applications:

• On/off and light level remote control for lamps.
• X10 control for already existing momentary switches.
• Converts every existing momentary switch to a X10 transmitter.
• Complete control of all X10 lamp modules by conventional momentary switches.
• Free choice (brand, design, colour etc.) for switches and electrical outlets.
• Invisible installation of X10 modules.
• Ideal also for the installation into lamps, devices and everywhere else where space is too limited for bigger X10 modules.

Technical information:

• Power supply: 230VAC/50Hz
• Energy consumption: < 30mA capacitive
• Signal transmission: > 5Vpp - 5 Ohm at 120kHz ± 1kHz, 1 pulse burst on 0° and 180°
• Signal sensitivity: 25mVpp - 6Vpp at 120kHz ± 4kHz
• Signal/noise ratio: 1.35 : 1
• X10 receiving commands: All Units Off, All Lights On, On, Off, Dim, Bright, Status Request, Extended code
• External control: momentary switches
• Conductor size: up to 2.5mm²
• 3 phase operation: with CAT4000 Phase Coupler Repeater only
• Ambient temperature: -10°C to 35°C (operation), -20°C to 70°C (storage)
• Dimensions: 46 x 46 x 16mm
• Mounting dimensions: 50 x 50 x 20mm
• Warning: For professional installation only! Please consult your electrician.
• Certificates: CE

Note: This product is also available as special offer!