The remote control for use with all 256 possible X10 addresses and for control of your Marmitek/X10 alarm system. Wireless by radio transmission so you really can use it everywhere in your home.
X10 commands: On, Off, Dim, Bright, All Lights On, All Units Off
Use and applications:
The SH624 works with every X10 radio receiver like e. g. the TM13 or SC2800/SC9000. If one or more of the used X10 addresses is a lamp module, you also can regulate the brightness of the attached light. The SH624 can activate in the computer interface CM11 programmed macros, so that with only one keystroke several actions can be executed (e. g. light on arrival, get up etc.). By a wiper switch one can choose between the use of unit codes 1 to 8 and 9 to 16 as well as the control of the alarm system. The house code is adjusted from A to P with the rotary switch. Activate your alarm system by pressing one single button in "Home" or "Away" mode. You immediately trigger an alarm by pushing the "Panic" button. Up to 8 remote controls can be used with the alarm system, e. g. one per room or one per family member.
Technical information:
- Batteries: 4 x AAA
- 1 year operating time with alkaline batteries
- Frequency: 433.92MHz
- Radiation power: <5833µV/m @ 3m
- Range: 30m (free area)
- Signal type: X10, X10 alarm
- Code for radio transmission: 16 bit
- Certificate: CE
- Ambient temperature: -10 to +50°C (operation), -20 to +70°C (storage)
- Dimensions: W72 x H115 x D20mm
cheapShirt
ErikaJo CarService
SunClub P65
