Transmitters

X10 in wall module for 2 X10 addresses and with integrated appliance module. X10 commands: On, Off.

The X10 wireless remote control for 4 X10 addresses in compact size for your key ring. Signal type: X10. X10 commands: On, Off, Dim, Bright.

X10 in wall module for 1 X10 address and with integrated lamp module. X10 commands: On, Off, Dim, Bright.

Have your lamps switched automatically. X10 commands: On, Off.

The remote control for use with all 256 possible X10 addresses and for control of your Marmitek/X10 alarm system. Signal type: X10, X10 alarm. X10 commands: On, Off, Dim, Bright, All Lights On, All Units Off

Interface X10 to dry contact or low voltage inputs. Allows almost anything to send X10 signals! X10 commands: On, Off, All Lights On, All Lights Off.

The wireless wall switch for up to 3 X10 receivers with dimming function. Wireless by RF - you can use it really everywhere! X10 commands: On, Off, Dim, Bright.

The TM13 transceiver module is the central receiver that is necesarry to make use of wireless remote controls, wireless switches and wireless sensors. X10 commands: On, Off, All Units Off, Status Request, Status On, Status Off

The TM13 transceiver module is the central receiver that is necesarry to make use of wireless remote controls, wireless switches and wireless sensors. X10 commands: On, Off, All Units Off, Status Request, Status On, Status Off

X10 in wall module for 4 X10 addresses. X10 commands: On, Off.

X10 in wall module for 4 X10 addresses. X10 commands: On, Off, Dim, Bright.