ActiveHomePro Start Kit CK13P - X10 - Marmitek

The affordable way to start with home automation: Easy to programme, easy to install and just as easy to expand.

Features:

• By PC programmable controller.
• After the programming the controller can get separated from the PC, the stored macros and timers are executed by the controller itself.
• More programming possibilities because of conditional macros. For instance: The simulation of presence is executed only when your alarm system is activated.
• Memory suitable for approximately 1,400 macros/timers.
• User friendly software for beginners, with numerous extension possibilities for the experienced X10 user.
• Built in X10 RF transmitter and X10 transceiver (like the TM13) for specific or all house codes.
• Automatic control of lamps - incl. preset light levels - and appliances.
• Perfect presence simulation to deter burglars.
• Easy to install.
• No need for additional wiring: Just plug and play.

Everything you need for the easy and affordable start with the programmable comfort of home automation is already contained in this set. With extras like extended codes, conditional macros and a built in transceiver, the CM15Pro offers the functionality of a computer interface and a transceiver in one. In combination with the CM15Pro you'll only need X10 receivers in order to control your lighting and equipment. With your computer you can program whatever you like. Switching on your lights at set or varying times (intelligent presence simulation), creating macros for your home theatre, switching your outside lighting or having a fresh pot of coffee ready when you are woken up by the atmospheric lighting in your bedroom. Once everything is set according to your wishes, you can transfer this into the memory of the CM15Pro and turn off your computer. That way you can also pre-configure the CM15Pro for use in another house, e. g. your vacation home.
The "LM12 Lamp Module" and the "AM12 Appliance Module" are simply put into an electrical outlet and the respective lamps or other appliances whom you want to use are put into the corresponding module. Now adjust the desired House and Unit codes for the LM12 and AM12 as described in the manual. After you have programmed the CM15Pro according to your wishes you're done. Now you have managed your start into the energy-saving and comfortable world of home automation!

Set contains:

• 1 x CM15Pro ActiveHomePro Interface
  • Technical information (statement):
    • Backup battery: 9V 6LR61 alkaline block battery (included)
    • Backup time: 1 week (typ.)
    • X10 commands transmit: All units Off, All Lights On, On, Off, Dim, Bright, All Lights Off, Extended Code 1 type 0, Extended Code 1 type 3, Hail Acknowledge, Pre-Set Dim, Status Request
    • X10 commands receive: All units Off, All Lights On, On, Off, Dim, Bright, All Lights Off, Extended Code 1 type 3, Hail Request, Pre-Set Dim, Status Request
    • X10 Collision Detection
    • RF range: 30m (The unit should be mounted at a height of 1m for best performance and located away from any sources of RF interference such as computers, monitors, etc.)
    • RF power: 10mW (max.)
    • RF frequency: 433.92MHz
    • Dimensions: W66,7 x H113,5 x D45,3mm
    • System requirements: free USB Port, CD oder DVD drive, MS-Windows XP or Vista
    • Certificates: CE
• 1 x LM12 Lamp Module
  • X10 commands: On, Off, Dim, Bright, All Lights On, All Units Off
  • Features:
    • Lamp module for up to 300W load.
    • Auto sense function for local control if a remote control is not handy.
    • Universally usable everywhere where an electrical outlet is available.
  • Technical information (statement):
    • Capacity: 40 - 300W/230VAC (normal light bulbs only)
    • Minimum load: 40W
    • Ambient temperature: -10°C to 50°C (operation), -20°C to 70°C (storage)
    • Dimensions: W52 x H122 x D33mm (without plug)
    • Certificates: CE
• 1 x AM12 Appliance Module
  • X10 commands:On, Off, All Units Off
  • Technical information (statement):
    • Capacity: 3,600W/230VAC resistive load, 230W/230VAC inductive/capacitive load, 500W/230VAC low voltage halogen lights
    • Ambient temperature: -10°C to 50°C (operation), -20°C to 70°C (storage)
    • Dimensions: W52 x H122 x D33mm (without plug)
    • Certificates: CE