Motion Sensor Start Kit - X10 - Marmitek

The affordable way to start with home automation: Easy to install and just as easy to expand.

Features:

• The outer lights switch on automatically - never again search for the door lock in the dark and deter burglars.
• The corridor or stairwell light switches on automatically - never again stand in the dark.
• Easy to install.
• No need for additional wiring: Just plug and play.

Everything you need for the easy and affordable start with home automation is already contained in this set. The "LM12 Lamp Module" is simply put into an electrical outlet and the lamp you want to use is put into the module. Put the "TM13 Transceiver" into an electrical outlet, here you can also attach e.g. a lamp, a fan etc. and control it with X10 commands. Now adjust the desired House and Unit codes for the LM12, TM13 and MS13 as described in the manual. Then you adjust the delay time in the MS13 after which the light shall be turned off automatically. That's it, you have managed your start into the energy-saving and comfortable world of home automation!

Set contains:

• 1 x 1 x LM12 Lamp Module
  • X10 commands: On, Off, Dim, Bright, All Lights On, All Units Off
  • Features:
    • Lamp module for up to 300W load.
    • Auto sense function for local control if a remote control is not handy.
    • Universally usable everywhere where an electrical outlet is available.
  • Technical information (statement):
    • Capacity: 40 - 300W/230VAC (normal light bulbs only)
    • Minimum load: 40W
    • Ambient temperature: -10°C to 50°C (operation), -20°C to 70°C (storage)
    • Dimensions: W52 x H122 x D33mm (without plug)
    • Certificates: CE
• 1 x TM13 Transceiver
  • X10 commands: On, Off, All Units Off, Status Request, Status On, Status Off
  • Technical information (statement):
    • Switching capacity: 300W for light bulbs and low-voltage halogen lamps, 500W inductive/capacitive loads
    • Frequency: 433.92MHz
    • Ambient temperature: -10°C to 50°C (operation), -20°C to 70°C (storage)
    • Dimensions: 52 x 122 x 33mm (excluding plug)
    • Certificates: CE
• 1 x MS13 Wireless Motion Sensor
  • X10 commands: On, Off
  • Technical information (statement):
    • RF range: up to 30m outdoors, up to 20m through walls and ceilings
    • RF frequency: 433.92MHz
    • Motion sensor: PIR; range 45º - 5m, 0° - 12m
    • Delay time: adjustable to 1, 2, 4, 8, 16, 32, 64, 128 and 256 minutes
    • Ambient temperature: -10°C to 30°C (operation), -20°C to 70°C (storage)
    • Dimensions: 67 x 67 x 27mm (without antenna)
    • Certificates: CE