ActiveHome Start Kit CK13 - X10 - Marmitek

The affordable way to start with home automation: Easy to programme, easy to install and just as easy to expand.

Features:

• By PC programmable controller.
• After the programming the controller can get separated from the PC, the stored macros and timers are executed by the controller itself.
• Memory suitable for approximately 40 macros/timers.
• User friendly software for beginners.
• Automatic control of lamps - incl. preset light levels - and appliances.
• Perfect presence simulation to deter burglars.
• Easy to install.
• No need for additional wiring: Just plug and play.

Everything you need for the easy and affordable start with the programmable comfort of home automation is already contained in this set. With the CM11 you have the basis for automating your entire house. With your computer you can program whatever you want. Switching on your lights at set or varying times (standard presence simulation), creating macros for your home theatre, switching your outside lighting or having a fresh pot of coffee ready when you are woken up by the atmospheric lighting in your bedroom. In combination with the CM11 you'll only need X10 receivers in order to control your lighting and equipment. Once everything is set according to your wishes, you can transfer this into the memory of the CM11 and turn off your computer. You can also pre-configure the CM11 for use in another house, e. g. your vacation home.
The "LM12 Lamp Module" and the "AM12 Appliance Module" are simply put into an electrical outlet and the respective lamps or other appliances whom you want to use are put into the corresponding module. Now adjust the desired House and Unit codes for the LM12 and AM12 as described in the manual. After you have programmed the CM11 according to your wishes you're done. Now you have managed your start into the energy-saving and comfortable world of home automation!

Set contains:

• 1 x CM11 ActiveHome Interface
  • Technical information (statement):
    • Backup battery (clock only): 2 x AAA
    • Backup time: 1 week (typ.)
    • Memory events/macros: 25 typ., 39 max. Varies with mix of events and macros.
    • PC connection: RJ11 jack to USB
    • System requirements: free USB port, MS-Windows 95, MS-Windows 98/SE, MS-Windows ME, MS-Windows 2000 or MS-Windows XP
    • Software on CD-ROM: ActiveHome (German, English, French, Dutch)
    • Note: For use with "MS-Windows XP SP2" it can be necessary to run ActiveHome in the so called compatibility mode set to "MS-Windows 2000".
    • Certificates: CE
• 1 x LM12 Lamp Module
  • X10 commands: On, Off, Dim, Bright, All Lights On, All Units Off
  • Features:
    • Lamp module for up to 300W load.
    • Auto sense function for local control if a remote control is not handy.
    • Universally usable everywhere where an electrical outlet is available.
  • Technical information (statement):
    • Capacity: 40 - 300W/230VAC (normal light bulbs only)
    • Minimum load: 40W
    • Ambient temperature: -10°C to 50°C (operation), -20°C to 70°C (storage)
    • Dimensions: W52 x H122 x D33mm (without plug)
    • Certificates: CE
• 1 x AM12 Appliance Module
  • X10 commands:On, Off, All Units Off
  • Technical information (statement):
    • Capacity: 3,600W/230VAC resistive load, 230W/230VAC inductive/capacitive load, 500W/230VAC low voltage halogen lights
    • Ambient temperature: -10°C to 50°C (operation), -20°C to 70°C (storage)
    • Dimensions: W52 x H122 x D33mm (without plug)
    • Certificates: CE