LW12 In-Wall Lamp Module - X10 - Marmitek

You would like to keep your existing wall switch design but not do without the comfort of the home automation? This in-wall lamp module is then the right thing for you!

X10 commands: On, Off, Dim, Bright, All Lights On, All Lights Off, All Units Off, Extended code

The LW12 is a very little X10 receiver for the installation behind (existing) momentary switches. The LW12 has a memory function for last dimmer setting and Soft-On/Off. As the only X10 module the LW12 works without neutral connection, thus the installation is really everywhere possible without greater effort. The LW12 is designed to fit in the rear of European junction boxes, behind any installed switch or outlet, presupposed a rest mounting depth of approx. 20mm.

Features:

• Very small - 46 x 46mm and only 17mm height.
• Operation by momentary switch or remotely controlled by X10 command.
• Built-in lamp module for up to 250W load.
• Soft-On and Soft-Off.
• Memory function for last dimmer setting.
• House code, unit code and adjustments are very simply to programme with any compatible X10 controller (e. g. EasyControl 8 in connection with the TM13 transceiver).

Applications:

• Remote control for lights.
• X10 control for already existing momentary switches.
• Free choice (brand, design, colour etc.) for switches and electrical outlets.
• Invisible installation of X10 modules.
• Ideal also for the installation into ceiling outlets, devices and everywhere else where space is too limited for bigger X10 modules.

Technical information:

• Power supply: 230VAC/50Hz
• Energy consumption: < 20mA capacitive
• Capacity: 60 - 250W/230VAC
• Minimum load: 60W
• Input impedance: > 180 Ohm (L-N) at 120kHz
• Signal sensitivity: 15mVpp min. 50mVpp max. at 120kHz
• External control: momentary switches
• Conductor size: up to 2.5mm²
• 3 phase operation: with 3 x FD10 Filter / Coupler for rail mount or 1 x CAT4000 Phase Coupler Repeater
• Ambient temperature: -10°C to 40°C (operation), -20°C to 70°C (storage)
• Dimensions: 46 x 46 x 17mm
• Mounting dimensions: 50 x 50 x 20mm
• Warning: For professional installation only! Please consult your electrician.
• Certificates: CE

Note: Not suitable for use with luminescent lamps and energy-saving lamps!

Note: This product is also available as special offer!