LM15 Lamp Module - X10 - Marmitek

The unviversal lamp module - also for energy-saving lamps.

X10 commands: On, Off, All Lights On, All Units Off

Remove your light bulb from its socket and insert the module into the light socket. Insert the light bulb into the module. Now set the desired code for the lamp module with a X10 remote control within 30 seconds (s. manual) and the module is operational.

Features:

• Lamp module with lamp socket for up to 100W load.
• For energy-saving and conventional lamps.
• Universally usable everywhere where a suitable lamp socket is available.

Applications:

• Remote control for lamps.
• Converts every existing lamp socket to a X10 controlled lamp socket.
• Ideal for controlling bedside lamps, reading lamps, wall lamps etc.

Technical information:

• Power supply: 230VAC/50Hz
• Energy consumption: < 20mA capacitive
• Capacity: max. 100W for open shades, max. 60W for closed shades
• Lamp socket: E27
• Input impedance: > 55 Ohm (L-N) at 120kHz
• Signal sensitivity: 15mVpp min. 50mVpp max. at 120kHz
• 3 phase operation: with 3 x FD10 Filter / Coupler for rail mount or 1 x CAT4000 Phase Coupler Repeater
• Ambient temperature: -10°C to 50°C (operation), -20°C to 70°C (storage)
• Dimensions: D46 x H93mm
• Certificates: CE

Note: This product is also available as special offer!