LD11 Lamp Module for rail mount - X10 - Marmitek

The rail mount lamp module for the control of bigger loads. With memory function for last dimmer setting.

X10 commands: On, Off, Dim, Bright, All Lights On, All Lights Off, All Units Off, Extended Code

The module is installed according to the enclosed manual in a distribution box. It has one terminal connection for connecting a momentary switch to which the module then also reacts. It replaces available notching relays, time switches, conventional light controls etc. and you can also control bigger light systems with your home automation.

Features:

• Operation by momentary switch or remotely controlled by X10 command.
• Lamp module for up to 700W load.
• Soft-On and Soft-Off.
• Memory function for last dimmer setting.

Applications:

• Remote control for lights.
• Replacement for notching relays, time switches, conventional light controls etc. with full control by X10 home automation.
• Intelligent control of all lights.
• Control of bigger light systems by X10 home automation.

Technical information:

• Power supply: 230VAC/50Hz
• Energy consumption: < 20mA capacitive
• Capacity: 40 - 700W/230VAC
• Minimum load: 40W
• Fuse: 2.5AT
• Input impedance: > 60 Ohm (L-N) at 120kHz
• Signal sensitivity: 15mVpp min. 50mVpp max. at 120kHz
• External control: momentary switches
• 3 phase operation: with 3 x FD10 Filter / Coupler for rail mount or 1 x CAT4000 Phase Coupler Repeater
• Ambient temperature: -10°C to 50°C (operation), -20°C to 70°C (storage)
• Dimensions: W50 x H80 x D70mm
• Warning: For professional installation only! Please consult your electrician.
• Certificates: CE

Note: Not suitable for use with luminescent lamps and energy-saving lamps!

Note: This product is also available as special offer!