AD10 Appliance Module for rail mount - X10 - Marmitek

The rail mount appliance module for the control of bigger loads. With this module you can replace e. g. the notching relay of your stairwell lights.

X10 commands: On, Off, All Units Off

The module is installed according to the enclosed manual in a distribution box. It has two terminal connections for connecting a switch or momentary switch to which the module then also reacts. It replaces available notching relays, time switches etc. and you can also switch big loads with your home automation.

Features:

• Appliance module (relay) for up to 3,600W/16A load.
• At power loss the relay keeps its last state.
• Status LED

Applications:

• On/off remote control for electrical devices.
• Replacement for notching relays, time switches etc. with full control by X10 home automation.
• Intelligent control of stairwell and outside lights.
• Control of bigger power absorbers like hot-water tanks, pumps etc. by X10 home automation.

Technical information:

• Power supply: 230VAC/50Hz
• Energy consumption: < 20mA capacitive
• Capacity: 3,600W/230VAC resistive load, 700W/230VAC inductive/capacitive load, 2,000W/230VAC low voltage halogen lights
• Input impedance: > 180 Ohm (L-N) at 120kHz
• Signal sensitivity: 15mVpp min. 50mVpp max. at 120kHz
• External control: on/off switches, momentary switches
• Relay load: 16A
• 3 phase operation: with 3 x FD10 Filter / Coupler for rail mount or 1 x CAT4000 Phase Coupler Repeater
• Ambient temperature: -10°C to 50°C (operation), -20°C to 70°C (storage)
• Dimensions: W35 x H80 x D70mm
• Warning: For professional installation only! Please consult your electrician.
• Certificates: CE

Note: Please read our FAQs for use with luminescent lamps and energy-saving lamps!

Note: This product is also available as special offer!