SWM1P MicroModule Shutter Switch - X10 - Marmitek

You would like to keep your existing wall switch design but not do without the comfort of the home automation? The MicroModules are then the right thing for you!

X10 commands: On, Off, Dim, Bright, Extended Code

The SWM1P MicroModule is a very small in wall module for automated control of all your blinds, curtains, sunscreens etc. with 1 X10 address for direct control and 1 additional X10 address for accessing a preset position.

Features:

• Very small - 46 x 46mm and only 16mm height.
• Local operation by attached momentary switch or remotely controlled by X10 command.
• Built-in relay for control a 230VAC motor with up to 2,5A load.
• Two way X10 communication without additional wiring between the modules - MicroModules send their status each other by power line.
• One free programmable X10 address (A1 - P16) for operation.
• One free programmable X10 address (A1 - P16) for preset access.
• Preset function: A position for rolling down shutters (e. g. a day-/ventilation position) which can be pre-set.
• Local blocking function for blocking the motor during cleaning the windows or maintenance.
• Works with a single 2 way momentary switch for up/down control.
• Works with a double 2 way momentary switch for up/down/preset/lock control.
• Quick and easy to install and to programme.
• House code, unit code and adjustments are very simply to programme with any compatible X10 controller (e. g. EasyControl 8 in connection with the TM13 transceiver).
• Improved signal quality for a reliable X10 communication.
• Configuration LED

Applications:

• Remote control for blinds, curtains, sunscreens etc.
• Complete control by conventional momentary switches.
• Free choice (brand, design, colour etc.) for switches and electrical outlets.
• Ideal also for the installation e. g. into walls, shutter boxes and everywhere else where space is too limited for bigger X10 modules.

Technical information:

• Power supply: 230VAC/50Hz
• Energy consumption: < 1W, < 30mA capacitive
• Capacity: 500W/230VAC with temperature and mounting restrictions
• Protection: Continuous driving time maximum 4 minutes, output temperature protected
• Fuse: Radial lead micro fuse, 4AT, 250VAC
• Signal transmission: > 5Vpp - 5 Ohm at 120kHz ± 1kHz, 1 pulse burst on 0° and 180°
• Signal sensitivity: 25mVpp - 6Vpp at 120kHz ± 4kHz
• Signal/noise ratio: 1.35 : 1
• X10 receiving commands: On, Off, Dim, Bright, Status Request, Extended code 1 type 3
• External control: single or double 2 way momentary switches
• Conductor size: up to 2.5mm²
• 3 phase operation: with CAT3000 Active Repeater only
• Ambient temperature: 0°C to 35°C (40°C)
• Relative humidity: 30 to 90%, not condensing
• Dimensions: 46 x 46 x 16mm
• Mounting dimensions: 50 x 50 x 20mm
• Warning: For professional installation only! Please consult your electrician.
• Certificates: CE