The filter/phase coupler for the smooth operation of your home automation.
Electrical consumers can cause interferences. With the FD10 you provide that such interferences from outside won't affect your X10 signalling. The FD10 also prevents the penetrating of X10 commands from outside and exiting your X10 commands to outside. In addition, it works also as a phase coupler if you want to use X10 signals over more than one phase.
For further information please look at our
FAQs.
Technical information:
- Voltage: 230VAC +10% -15% 50Hz
- Max. load: 63A
- Filter frequency: 120kHz
- Filter bandwith: 5kHz min. (3dB points)
- Attenuation incoming: 20dB min. for I = 0A, 15dB min.for I = 63A
- Attenuation outgoing: 15 dB min.
- Input impedance: 20 Ohm min. for f = 120kHz
- Coupling loss: 2dB max. for f = 120kHz
- Warning: For professional installation only! Please consult your electrician.
- Connectors: screw terminals for phase input, phase output, null and coupling
- Ambient temperature: -10°C to 50°C (operation), -20°C to 70°C (storage)
- Dimensions: W35 x H80 x D65mm
- Certificates: CE
cheapShirt
ErikaJo CarService
SunClub P65
