CM15Pro ActiveHomePro Interface - X10 - Marmitek

X10 combined computer/RF interface with "intelligent" ActiveHomePro software!

Features:

• This is the Pro-version of the CM11.
• More programming possibilities because of conditional macros. For instance: The simulation of presence is executed only when your alarm system is activated.
• More memory: Possibility to use approximately 1,400 macros/timers.
• Built in X10 RF transmitter and X10 transceiver (like the TM13) for specific or all house codes.
• User friendly software for beginners, with numerous extension possibilities for the experienced X10 user.

With extras like extended codes, conditional macros and a built in transceiver, this product offers the functionality of a computer interface and a transceiver in one. In combination with the CM15Pro you'll only need X10 receivers in order to control your lighting and equipment. With your computer you can program whatever you like. Switching on your lights at set or varying times (intelligent presence simulation), creating macros for your home theatre, switching your outside lighting or having a fresh pot of coffee ready when you are woken up by the atmospheric lighting in your bedroom. Once everything is set according to your wishes, you can transfer this into the memory of the CM15Pro and turn off your computer. That way you can also pre-configure the CM15Pro for use in another house, e. g. your vacation home.

Technical information:

• Supply voltage: 230VAC +/-10% 50Hz, 7W
• Backup battery: 9V 6LR61 alkaline block battery (included)
• Backup time: 1 week (typ.)
• Power consumption: <30mA
• PLC: >120kHz ± 2kHz/2,5Vpk-pk
• Signal sensitivity: 15mVpp min., 50mVpp max. at 120kHz
• Signal/noise ratio: 1,35:1
• X10 transmission: 1 pulse burst at 0°, 60° und 120°
• X10 commands transmit: All units Off, All Lights On, On, Off, Dim, Bright, All Lights Off, Extended Code 1 type 0, Extended Code 1 type 3, Hail Acknowledge, Pre-Set Dim, Status Request
• X10 commands receive: All units Off, All Lights On, On, Off, Dim, Bright, All Lights Off, Extended Code 1 type 3, Hail Request, Pre-Set Dim, Status Request
• X10 Collision Detection
• Input impedance: > 180 Ohm (P-N) at 120kHz
• RF range: 30m (The unit should be mounted at a height of 1m for best performance and located away from any sources of RF interference such as computers, monitors, etc.)
• RF power: 10mW (max.)
• RF frequency: 433.92MHz
• Ambient temperature: -10°C to 50°C (operation), -20°C to 70°C (storage)
• Dimensions: W66,7 x H113,5 x D45,3mm
• System requirements: free USB Port, CD oder DVD drive, MS-Windows XP or Vista
• Certificates: CE