CM11 ActiveHome Interface - X10 - Marmitek

The ActiveHome Interface is the powerful low cost home automation system controlling lights and appliances from your PC!

Features:

• Memory suitable for approximately 40 macros/timers.
• User friendly software for beginners.
• Software in Dutch, French, English and German.
• Can also be used in combination with other Home Automation software.

With the CM11 you have the basis for automating your entire house. With your computer you can program whatever you want. Switching on your lights at set or varying times (standard presence simulation), creating macros for your home theatre, switching your outside lighting or having a fresh pot of coffee ready when you are woken up by the atmospheric lighting in your bedroom. In combination with the CM11 you'll only need X10 receivers in order to control your lighting and equipment. Once everything is set according to your wishes, you can transfer this into the memory of the CM11 and turn off your computer. You can also pre-configure the CM11 for use in another house, e. g. your vacation home.

Technical information:

• Supply voltage: 230VAC/50Hz
• PLC: f=120kHz, u=2,5Vpp
• Backup battery (clock only): 2 x AAA
• Backup time: 1 week (typ.)
• Memory events/macros: 25 typ., 39 max. Varies with mix of events and macros.
• PC connection: RJ11 jack to USB
• System requirements: free USB port, MS-Windows 95, MS-Windows 98/SE, MS-Windows ME, MS-Windows 2000 or MS-Windows XP
• Software on CD-ROM: ActiveHome (German, English, French, Dutch)
• Certificates: CE

Note: For use with "MS-Windows XP SP2" it can be necessary to run ActiveHome in the so called compatibility mode set to "MS-Windows 2000".