SD833 Smoke Detector - Marmitek

The wireless smoke detector for the expansion of your ProGuard800 alarm system or for stand-alone use. Smoke detectors save lives!

Features:

• Wireless smoke detector with battery.
• In case of a fire the smoke detector sends an alarm signal to your Marmitek ProGuard800. The system then will call the pre-programmed telephone numbers.
• Built-in 85dB siren and flash light.
• Also works when your system is in standby mode (Disarmed).
• Low battery indication via your ProGuard800 console.
• No radioactive elements used.
• EN-54-7 approved.

The Marmitek SD833 smoke detector ensures that you receive a timely warning in case of a fire. When you are at home, the built-in siren will raise the alarm. Combined with your Marmitek ProGuard800 the internal siren, the phone dialer and the home automation controller will also be activated. This means you will get optimal warning and your exits are clearly lit (corresponding programming presupposed). When you are out, you will receive a warning via your mobile phone. The smoke detector operates by the optical principle and detects incipient low temperature fires and open fires with smoke development.

Technical information:

• Antenna: Built-in whip
• Frequency: 868.35MHz
• Power supply: 9V Alkaline battery
• Power consumption: 30mA transmission, 20µA standby
• RFI immunity: 40V/m
• Operating temperature: 0°C to 60°C
• Dimensions: W138 x H118 x D44mm