The wireless alarm system with SMS notification - permanent phone connection superfluous!
Features:
- Wireless alarm system with SMS notification. Does not require a permanent telephone connection.
- Wherever you are, you receive alarm notification via SMS.
- Makes use of the GSM network (via a SIM card in the control unit); you can check the alarm system from anywhere (within the GSM coverage area).
- Ideal for the protection of your (vacation) home, construction project, stables, storage shed, etc.
- Alarm can be activated and deactivated remotely.
- You can switch lights and appliances on and off via a built-in relay. In combination with the X10 transmitter SM10 (available separately), you can integrate the system with Marmitek X10 home automation.
- You can program a maximum of two telephone numbers (for notification).
- The GSMguard300 set includes a control unit, two door/window sensors, an antenna and a siren.
- There is no limit to the number of extra wireless door/window sensors that can be added to the system.
Use and application:
Place the GSMguard300 Unit in a convenient location in your home (or storage area, vacation home, garage, etc.). The alarm system is powered by the mains supply that is included or 9VDC. Place a SIM card (not included) in the control unit. Attach the door/window sensors and monitor the provided siren (if desired). Once installed, you can use the GSMguard300 as a normal alarm system. In the event of an alarm, you receive an SMS. You can also test the alarm, temporarily deactivate the alarm or request a status report by sending an SMS. Extra wireless door/window sensors are available separately.
Technical information console:
- GSM modem: 900/1800MHz, dualband
- Relais output: 24VDC, 1A max., 250VAC, 1A max.
- Ambient temperature: -10°C bis 50°C (operation)
- Power supply: 9VDC by 230VAC mains adapter plug (included)
- Power consumption: active 210mA, standby 125mA
- Dimensions: W230 x H149 x D46mm
- Antenna: magnetic-mount antenna 900/1800MHz dualband with SMA connector and 3m 50 Ohm coaxial cable; height 160mm, diameter mount 30mm
- Siren: connection by 2 wires, sound output 105dB/30cm, dimensions 55 x 68 x 17mm
Technical information door/window sensor - 2 pieces included:
- Power supply: battery 006P, 9VDC (2 pieces included)
- Frequency: 433.92MHz
- Power consumption: individually switch on and off, if active 5,8mA, please change battery once a year
- Range: 15 - 30m through walls and ceilings
- Dimensions: H110 x W34 x D26mm
Note: Not compatible to other Marmitek/X10 alarm sensors (DS90, MS90 etc.)!
