You would like to keep your existing wall switch design but not do without the comfort of the home automation? This in-wall lamp module is then the right thing for you! 6 x Marmitek LMM32 for a special price!
X10 commands: On, Off, Dim, Bright, All Lights On, All Lights Off, All Units Off, Extended code
The LMM32 is a very little X10 receiver for the installation behind (existing) swichtches, momentary switches or sockets. The LMM32 controlls two loads, has a memory function for last light level setting and Soft-On/Off. Also it is equiped with a preset function for switching to the desired light level directly. The LMM32 is designed to fit in the rear of European junction boxes, behind any installed switch or outlet, presupposed a rest mounting depth of approx. 25mm.
Features Marmitek LMM32 In-Wall Lamp Module:
- Very small - 43.25 x 47mm and only 21mm depth.
- Operation by switch, momentary switch or remotely controlled by X10 command.
- Controlls 2 loads independently.
- Built-in lamp module for up to 400W load.
- Soft-On and Soft-Off.
- Memory function for last light level setting.
- Preset function for switching to the desired light level directly.
- House code, unit code and adjustments are very simply to programme with any compatible X10 controller (e. g. EasyControl 8 in connection with the TM13 transceiver).
cheapShirt
shop4tyres.com
BlechWunder
