Marmitek DS90 Door Window RF Sensor

Marmitek DS90: The wireless door window sensor for the expansion of your Marmitek SafeGuard or TotalGuard alarm system.

Features Marmitek DS90:

• The DS90 door/window sensor has a magnetic switch unit that triggers the console when a door or window where it is fixed to, is opened. This enables all the main entrances to a building to be protected.
• The sensor is battery powered and "connected" to the security system by radio which means that the installation of the units requires the minimum of effort but with the maximum effect.
• The sensor is monitored and failure of the sensor is reported by the base console.
• The DS90 door/window sensor has a contact for an extra wired sensor. These sensors need to be of type NC (normally closed contacts). There should not be any power on this contact (potential-free).
• This door window sensor can also be used to activate X10 modules (e. g. lights). Ideal to trigger functions in combination with the CM15Pro ActiveHomePro Interface.